Filter
Top Products
Bradyprinter 200M-e and 200M-e 300 User’s Guide 39
5LEERQ5HPRYDO
Refer to Figure 25.
1. Break the ribbon as close to the ribbon take-up spindle as possible.
2. Push the hook either forward or backward with your thumb until it
slips out of the groove (1). Slide the hook to the side (2), then rotate it
back and forth several times to loosen it (3).
3. Remove the loosened hook from the spindle (4).
4. Lightly tap the top of the used ribbon to loosen it; then grasp the used
ribbon and remove it from the ribbon take-up spindle.
5. Remove the empty core from the ribbon supply spindle.
6. Follow the ribbon loading procedure on page 37 to load the new
ribbon.
Figure 25