Brady 200M-e 300 Printer User Manual


  Open as PDF
of 118
 
Bradyprinter 200M-e and 200M-e 300 User’s Guide 19
3ULQWLQJD7HVW/DEHO
To print a test label:
1. Turn off the printer.
2. Press and hold the CANCEL key
while turning on the printer.
A configuration label showing the
printer’s currently stored parameters
prints (similar to the one shown in
Figure 11).
If you encounter any problems while
you are configuring or calibrating the
printer or printing a test label, refer to
“Troubleshooting” beginning on
page 71. Otherwise, refer to
“Establishing Communication”
beginning on page 21 to set up the
communication parameters.
Figure 11
 previous next