Filter
Top Products
Bradyprinter 200M-e and 200M-e 300 User’s Guide 21
ÆÏAOÆÍØYAÏ
6\VWHP&RQVLGHUDWLRQV
NOTE: Your Brady 200M-e or 200M-e 300 printer is equipped
with a DB9 serial connector.
,QWHUIDFHV
The method of interfacing this printer to a data source depends on the
communication options installed in the printer. The standard interfaces
are an RS-232 serial data port and a bi-directional parallel port. The
optional ZebraNet PrintServer II enables printers to be connected to
10Base-T Ethernet networks. In addition, the IBM
®
Twinax or IBM Coax
option is available for those applications that require them.
NOTE: RS-422 and RS-485 serial data ports require an adapter for
the DB9 serial interface connector. Contact Brady for details.
'DWD6SHFLILFDWLRQV
When communicating via an
asynchronous serial data port
(refer to Figure 12), the baud rate,
number of data and stop bits,
parity, and handshaking are user
selectable. Parity only applies to
data transmitted by the printer
since the parity of received data is
ignored.
Figure 12