Filter
Top Products
Bradyprinter 200M-e and 200M-e 300 User’s Guide 15
&RQILJXULQJWKH3ULQWHU
The configuration procedure in Table 1 contains the information you need
to get your printer up and running, but it is not comprehensive. Refer to
page 41 for more information.
• Enter the configuration mode by pressing the
SETUP/EXIT key at the “PRINTER READY” display.
NOTE: You need to press the NEXT/SAVE key
more than once to advance to some of the displays.
• To increase the value, answer “yes,” indicate “on,” or
move to the next selection, use the (+) key.
• To decrease the value, answer “no,” indicate “off,” or
return to the previous selection, use the (–) key.
NOTE: When changing parameters, an asterisk (*)
in the upper left-hand corner of the display indicates that you have
changed this setting from the setting that is currently stored in
memory.