Filter
Top Products
of the printhead may be reduced by abrasion from exposed paper
fibers when using perforated media.
Since print quality is affected by media and ribbon, printing
speeds, and printer operating modes, it is very important to run
tests for your applications. This is especially true if you’re
operating in “Peel-Off” mode, where these variables combine
with label size, backing content, diecut depth, and even humidity
to affect printer operation.
CAUTION: To ensure that the Brady M-Series Printer has
proper cooling, do not place any padding or cushioning
material on the back of, or underneath, the unit.
CAUTION: Refer to Section 2 for instructions on configuring
your printer for 240 VAC operation before connecting to a
240 VAC power source.
CAUTION: Refer to the Interconnections Section.
Brady printers comply with FCC “Rules and Regulations”,
Part 15, Subpart J, for Class A Equipment, using fully shielded
data cables. Use of unshielded cables may increase radiated
emissions above the Class A limits and is not recommended.
Brady printers comply with international regulations governing
radiated emissions when using fully shielded data cables. Use
of unshielded cables may increase radiated emissions above the
regulated limits.
1-4