Filter
Top Products
Your Brady M-Series Printer may be equipped with a Peel-Off
Option. In the Peel-Off Mode, only the label backing rewinds onto
the Rewind Spindle. The Peel/Tear Bar separates the label from the
backing and the Label Available Sensor activates the PAUSE
mode to allow the operator to remove a printed label before
subsequent labels print.
Your M-Series Printer may be equipped with a Media Rewind
Option. This option supports both the Rewind and Peel-Off
modes of operation.
In Rewind mode, both labels and backing material rewind
internally onto a user-supplied 3 inch core. A Rewind Bracket
guides the media back to the Rewind Spindle after printing.
(See Peel-Off Option for Peel-Off mode of operation.)
The M-Series Printer can be optioned with character fonts in
addition to those which are standard in the unit.
Only one additional font can be installed in the printer at a time.
This installation should be performed by a service technician.
Once installed, this font can be used in addition to the standard
fonts available in the printer. Refer to the ZPL II Programming
Guide for further application information.
Once an optional font is installed in the printer, the Configuration
printout from the CANCEL Key Self Test will indicate the font
type.
The following optional scalable smooth fonts are presently
available (each is supplied as a complete set of standard, bold,
italic, and bold italic styles): CG Triumvirate, CG Times, CG
Palacio, Futura,
Univers
®
.
9-1