Filter
Top Products
160
Configuring your machine for a network
11
IEEE 802.1x Authentication 11
IEEE 802.1x is an IEEE standard for wired and wireless networks that limits access from unauthorized
network devices. Your Brother machine (supplicant) sends an authentication request to a RADIUS server
(Authentication server) through your access point (authenticator). After your request has been verified by the
RADIUS server, your machine can access the network.
Authentication methods 11
LEAP (For wireless network)
Cisco LEAP (Lightweight Extensible Authentication Protocol) has been developed by Cisco Systems, Inc.
which uses a user ID and password for authentication.
EAP-FAST
EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secured Tunneling) has been
developed by Cisco Systems, Inc. which uses a user ID and password for authentication, and symmetric
key algorithms to achieve a tunneled authentication process.
The Brother machine supports the following inner authentication methods:
• EAP-FAST/NONE
• EAP-FAST/MS-CHAPv2
• EAP-FAST/GTC
EAP-MD5 (For wired network)
EAP-MD5 (Extensible Authentication Protocol-Message Digest Algorithm 5) uses a user ID and password
for challenge-response authentication.
PEAP
PEAP (Protected Extensible Authentication Protocol) has been developed by Microsoft Corporation, Cisco
Systems and RSA Security. PEAP creates an encrypted SSL (Secure Sockets Layer)/TLS (Transport
Layer Security) tunnel between a client and an authentication server, for sending a user ID and password.
PEAP provides mutual authentication between the server and the client.
The Brother machine supports the following inner authentications:
• PEAP/MS-CHAPv2
• PEAP/GTC