Filter
Top Products
20
Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))
3
Note
When the SSID is not broadcast, see Configuring your machine when the SSID is not broadcast
uu page 22.
h Enter the Network Key you wrote down in step a. (For information on how to enter text: uu Quick Setup
Guide.)
When you have entered all the characters press OK, and then press 1 for Yes to apply your settings. Go
to step i.
i Your machine will now try to connect to your wireless network using the information you have entered.
j If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
For Touchscreen models
3
a Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
For example:
3
Note
• If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
• If you see the button at the top right on the Touchscreen, you can easily configure the wireless
settings by pressing the button. Go to step e.
b Press Menu.
Network name: (SSID) Network Key
Network name: (SSID) Network Key
HELLO 12345678