Filter
Top Products
Control Panel
82
3
Default settings 3
The machine has three levels of default settings; the default settings have been set at the factory before
shipment (see Menu table on page 71).
Network default settings
Factory reset
Settings reset
Note
• You cannot modify the preset default settings.
• Page counter can never be changed.
Network default settings 3
If you want to reset only the print server back to its default settings (by resetting all network information such
as the password and IP address), follow these steps:
a Press + or - to choose Network. Press OK.
b Press + or - to choose Network Reset. Press OK.
c Press + to choose Reset.
d Press + to choose Yes. The machine will restart automatically.
Factory Reset 3
You can partially reset the machine back to its default printer settings. The settings that will not be reset are
the Interface, Local Language, Reprint, Set Registration, Setting Lock, Secure Function
Lock 2.0 and the Network settings:
a Press + or - to choose Reset Menu. Press OK.
b Press + or - to choose Factory Reset. Press OK.
c Press + to choose Reset.
Settings Reset 3
This operation will reset all the machine settings back to the settings that were set at the factory:
a Disconnect the network cable from the machine; otherwise the network settings (such as IP address) will
not be reset.
b Press + or - to choose Reset Menu. Press OK.
c Press + and Cancel at the same time. Press OK after Settings Reset appears.
d Press + to choose Reset.
e Press + to choose Yes. The machine will restart automatically.