Filter
Top Products
Control Panel
68
3
Machine status messages 3
The following table shows the machine status messages during normal operation:
1
(HL-4570CDW(T) only) When the Wireless Network is enabled the machine does not transfer to Deep Sleep mode. If you want to disable the
Wireless Network, change setting of the WLAN Enable to Off. (See Network for HL-4570CDW(T) users on page 77.)
Machine Status Message Meaning
Cooling Down The machine is cooling down.
Job Cancel
Job Cancel (All)
Canceling the job.
Ignore Data Machine is ignoring data processed using the PS driver.
Pause The machine has suspended its operations. Press Go to start the machine
again.
Please Wait The machine is warming up.
The machine is carrying out the calibration process.
Printing Printing.
Ready Ready to print.
Sleep In sleep mode (power save mode). The machine acts as though it were
turned off.
Deep Sleep
1
In Deep Sleep mode (reducing more power consumption than Sleep mode).
The machine acts as though it were turned off. If the machine does not
receive data for a certain length of time while it is in Sleep mode, it enters
Deep Sleep mode automatically.