Brother 4570CDW Printer User Manual


 
3
DO NOT put the product in a location where any slot or opening in the product is obstructed or
blocked. These slots and openings are provided for ventilation. Blocking the product’s
ventilation could create a risk of overheating and/or fire.
Instead:
Keep a gap of roughly 4 in. (100 mm) between the ventilation hole and the wall.
Place the product on a solid surface, never on a bed, sofa, rug, or other similar soft surface.
Do not place this product near or over a radiator or heater.
Do not place this product in a “built-in” installation unless adequate ventilation is provided.
DO NOT put objects on top of the product. Doing so could increase the risk of overheating
and/or fire should the product malfunction.
DO install your product near an AC power outlet that is easily accessible. In the event of an
emergency, easy access to the plug and outlet will allow you to shut off power to the product
quickly and completely.
Plastic bags are used in the packing of your product and drum unit. Plastic bags are not toys.
To avoid the danger of suffocation, keep these bags away from babies and children and dispose
of them properly.