Filter
Top Products
NETWORK SCANNING 12 - 9
Scan to File
When you select Scan to File you can scan a black and white or color
document and send it directly to a PC you designate on your
network. The file will be saved in the folder and file format that you
have configured in the Brother SmartUI on the designated PC. You
can change the
Scan
configuration.
(For Windows
®
98/Me/2000: See Scan to File on page 9-8 to 9-9.)
(For Windows
®
XP: See Hardware Section: Changing the Scan to
button configuration
on page 10-5 to 10-11.)
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Press
Scan
.
3
Press or to select
Scan
to File
.
Press
Set
.
4
Press or to select a
destination you want to send.
Press
Set
.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press
Set
.
The DCP will start the scanning process.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
Max. 25 clients can be connected to one DCP on a Network. For
example, if 30 clients try to connect at a time, 5 clients will not
be shown on the LCD.
▲
Scan to E-Mail
Scan to Image
Scan to OCR
▼
Scan to File
Select
▲▼
& Set