Filter
Top Products
UNIX PRINTING 1 - 9
NC9100h_FM6.0
The procedure for pre-V4.0 systems is as follows.
1
Enter smit and select devices.
2
Select printer/plotter.
3
Select manage remote printer subsystem.
4
Select client services.
5
Select remote printer queues.
6
Select add a remote queue.
7
Enter the following remote queue settings:
■ Name of queue to add (user selectable).
■ Activate the queue (Yes).
■ Destination host (Print/Fax server name; must match name
in /etc/hosts file or use the Print/Fax server IP address)
■ Name of queue on remote printer (Print/Fax server binary
or text service name, eg. BINARY_P1 or TEXT_P1).
■ Name of device to add (user selectable; for example lp0).
Sun Solaris 2.x Configuration
Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote
printer configuration:
lpsystem -t bsd prnservername
lpadmin -p queue -s prnservername!prnserverservice
accept queue (not required on newer Solaris systems)
enable queue (not required on newer Solaris systems)
Where queue is the name of the local Print/Fax queue.
prnservername is the name of the Print/Fax server (must match
the entry in the /etc/hosts file or IP address).
prnserverservice is the print server BINARY_P1 or TEXT_P1
service.