Filter
Top Products
NOVELL NETWARE PRINTING 6 - 11
NC9100h_FM6.0
18
Start the appropriate BRAdmin Professional utility, and select
the correct Printer/Fax server from the list (by default, the node
name is BRN_xxxxxx, where xxxxxx is the last six digits of the
Ethernet address (MAC address)).
19
Double click the appropriate Brother Print/Fax server. You will
be prompted for a password, the default password is access.
Now select the NetWare tab.
20
Select Queue Server as the operating mode.
The same service assigned by NetWare server name cannot be
used for both queue server mode and remote printer mode.
21
Enter the NDS tree name (note that a Print/Fax server can
service both NDS and bindery queues).
22
Type in the name of the context where the Print server resides.
23
Exit the BRAdmin Professional utility making sure that you save
the changes that you have made. You are now ready to print.
If you want to enable queue server capabilities on services
other than the default NetWare services, you must define
new services that are enabled for NetWare and for the
desired port. See the Appendix in this manual for information
on how to do this.