Filter
Top Products
FRONT PANEL SETUP MENU 10 - 1
10
Running H/F 4
10
Front Panel Setup Menu
LAN Main Setup Menu
With the Network (LAN) Board (NC-9100h Print/Fax Server)
installed, you can connect your machine into the network to use the
Internet FAX, Network Scanner and Network Printer.
1
Install the Network (LAN) Board (NC-9100h). For more
information, see Chapter 13 of User’s Guide included with the
machine.
2
Set up the machine for your Network using the control panel.
The LAN menu selections allow you to setup the machine for your
network and Internet Fax configuration. Press
Menu then press the
appropriate number for LAN, based on the selections displayed on
your machine. After you have displayed the LAN Main Setup menu,
there are seven main selections: Setup TCP/IP, Setup Internet,
Setup Mail RX, Setup Mail TX, Setup Relay, Setup Misc. and
Scan to E-mail. Proceed to the menu selection you wish to
configure.
Please note that once you have specified a valid IP address for the
machine, it is also possible to configure many aspects of the machine
using your favorite web browser. For added flexibility, the machine is
supplied with the BRAdmin Professional Windows
®
software, which
also can be used to configure many aspects of the NC-9100h.