Filter
Top Products
NETBIOS PEER TO PEER PRINTING 4 - 8
NC9100h_FM6.0
Windows NT
®
4.0 / Windows
®
2000/XP
2
Click on the Port/s tab and push the Add Port button. In the
Add Port dialog, highlight Brother NetBIOS port. Click New
Port and enter the port name. The default port name is BNT1. If
you have already used this name, you will get an error message
if you try to use it again, in which case use BNT2, etc... Once
you have specified the port name, click the OK button. You will
then see the Port Properties Dialog. Enter the Print/Fax server
and port name of the printer that you wish to print to and click
OK. You should now see the port that you have just created in
the Print to the following port setting of the printer driver.
Other Sources of Information
1
Visit http://solutions.brother.com/ for more information on
network printing.
2
To learn how to configure the IP address on your machine, see
Chapter 11 of this User’s Guide.