Filter
Top Products
8-26 Confidential
8.4.15 Display of the Equipment’s Log Information (Function code 80)
Function
The equipment may display its log information on the LCD.
Operating Procedure
(1) MFC7420/7820N
Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
DCP7010/7020/7025
Press the
key or key several times to display the “MAINTENANCE 80” code on
the LCD. Then press the Set key .
The USB serial number appears on the LCD.
(2) Press the Start key. Each time the Start key is pressed, one of the following log
information items appears on the LCD in the order given below.
1) Jam count, indicating how many times a paper jam has been occurred
2) Page count, indicating how many pages the photosensitive drum has been printed
3) Total page count, indicating how many pages the equipment has been printed since
produced
4) Drum count, indicating how many times the photosensitive drum has been rotated
5) Drum change count, indicating how many times drum replacement has been made
6) Toner change count, indicating how many times toner replacement has been made
7) Copy page count, indicating how many copies have been made
8) PC print page count, indicating how many pages the equipment has been printed as
an output device of the connected PC
9) FAX page count, indicating how many received FAX pages have been printed
10) Error code of the most recent machine error *
1
11) Error code of the most recent communications error *
2
12) ADF jam count, indicating how many times a document jam has been occurred
13) ADF page count, indicating how many documents have been fed
(3) To stop this operation and return to the equipment to the initial stage of the maintenance
mode, press the Stop/Exit key.
*
1 When you press the Menu/Set (Set) key while the MACHINE ERR error code is
displayed, the last error code is displayed. Each time the Menu/Set (Set) key is
pressed, up to the ten error codes are displayed one by one in reverse order.
*
2 When you press the Menu/Set (Set) key while the COMEER1 error is displayed,
the last error, the previous error, and the second previous error are displayed in turn.
The indication changes from COMEER1, COMEER2, to COMEER3.