Filter
Top Products
Chapter 9
56
Paging 9
When you choose Paging, your machine
dials the pager number you have
programmed, and then dials your PIN
(Personal identification Number). This
activates your pager so you will know that you
have a fax message in the memory.
If you have set Paging, a backup copy of the
received fax will automatically be printed at
the machine.
a Press Menu, 2, 4, 1.
Remote Fax Opt
1.Fwd/Page/Store
b Press a or b to choose Paging.
Press OK.
c Enter your pager phone number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
d Do one of the following:
If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
and then enter your fax number
followed by # #.
Press OK.
For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5
5 6 7 8 9 # #.
If you do not need a PIN, press:
Redial/Pause, and then enter your
fax number followed by # #.
Press OK.
For example, press:
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #
e Press Stop/Exit.
Note
You cannot change a paging number or
PIN remotely.
Fax Storage 9
If you choose Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the remote retrieval
commands.
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.
a Press Menu, 2, 4, 1.
Remote Fax Opt
1.Fwd/Page/Store
b Press a or b to choose Fax Storage.
Press OK.
c Press Stop/Exit.
Note
Color faxes cannot be stored in the
memory. When you receive a color fax
your machine prints the color fax at your
machine.