Filter
Top Products
4 - 4
INITIAL SETUP
Setting the Ring Volume
1
Press Menu/Set, 1, 4, 1.
2
Press to select (OFF, LOW, MED
or HIGH), and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your MFC is idle. You can turn the ring
OFF or you can select a ring volume level.
Press
to adjust the volume level. With each key press, the MFC rings so
you can hear the active setting as the LCD shows it.
Each key press changes the volume. The new setting will remain until you
change it again.
Setting the Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the MFC beeps every time you press
a key or make an error and when fax sending or receiving has finished.
1
Press Menu/Set, 1, 4, 2.
2
Press to select your option.
3
When the LCD shows the option you want, press Menu/Set.
4
Press Stop/Exit.
Setting the Speaker Volume
You can turn off the volume of the MFC one-way speaker.
1
Press Menu/Set, 1, 4, 3.
2
Press to select ON (or OFF), and then press Menu/Set.
3
Press Stop/Exit.
Memory Storage
In the event of a power failure, all settings in the GENERAL SETUP, SETUP
RECEIVE, SET AUTO DIAL, REMOTE FAX OPT, plus the COVERPG
SETUP and COVERPAGE MSG functions (from SETUP SEND) are stored
permanently. You may have to reset the date and time.
1.RING
or
or
2.BEEPER
or
or