TeraStation User Manual 12
The TeraStation can be congured to automatically turn on and o with your computer. To use this feature, install NAS
Navigator2 on your computer(s) and then set the Power Mode Switch on the back of your TeraStation to AUTO.
Notes:
• After you turn o your computer, it may take several minutes for the TeraStation to shut down.
• When the Power Mode Switch is changed from Auto to Manual or vice-versa, it takes about ve minutes for
the change to take eect.
• Power on the TeraStation before moving the switch to the Auto position.
• Auto Power Mode doesn’t work if port trunking is enabled or if NasNavi detection is disabled.
• Install NAS Navigator2 on all computers that will be accessing the TeraStation before switching to Auto Power
Mode.
• Some networks may not support the Auto Power Mode. If you have problems with it, just use Manual Power
Mode.
Manual (default):
In this position, the power button on the front of the TeraStation turns it on
and o. It is not aected by the power state of connected computers.
Auto:
In this position, if all connected computers are turned o, the TeraStation
will turn o too. If a connected computer is powered on, the TeraStation will
power on too.
TS-XL TS-XEL
TS-WXL
TS-RXL
Auto Power Mode