TeraStation User Manual 149
Examples of LCD Meaning
Chip Error E17
RTC Failure
The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO’s service center for repair.
Chip Error E18
SATA1 Failure
The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO’s service center for repair.
Chip Error E19
SATA2 Failure
The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO’s service center for repair.
Chip Error E20
USB Failure
The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO’s service center for repair.
Chip Error E21
Ethernet Failure
The circuit board is damaged. Unplug the power code of the TeraStation and reboot it. If the
error still persists, contact BUFFALO’s service center for repair.
HDx Error E22
HDx Can’t Mount
Failed to mount the hard drive. Format the hard disk. After formatting, reboot the system.
If the error is still displayed, replace the hard disk. The error still persists, contact BUFFALO’s
service center for repair.
HDx Error E23
HDx Is Faulty
An error occurred and the Xth hard disk was removed from RAID array. Replace Xth hard
drive.
SATAx Error E24
COMM. Failure
An error occurred to communicate with the Xth hard drive.
Reboot the TeraStation. The error still persists, contact BUFFALO’s service center for repair.
Replication E26
Replicate Failure
The error occurred during Replication. Click [Resynchronize] under [System] - [Backup] -
[Replication] in the Web Admin interface. The error still persists, contact BUFFALO’s service
center for repair.
* If you are using TS-RXL Series, LCD display with the height of 1 line contains 2 line’s worth of information. You can scroll horizontally
to view it.