Filter
Top Products
Interface Statistics Screen
2H23-50R/2H33-37R User’s Guide 5-83
CLEAR COUNTERS (Command)
This command clears all the counters of the displayed ports to zero. To
clear the counters, use the arrow keys to highlight CLEAR COUNTERS
at the bottom of the screen, then press ENTER.
5.24 INTERFACE STATISTICS SCREEN
The Interface Statistics screen, Figure 5-31, is used to gather MIB-II
statistics for all the 2H23-50R or 2H33-37R interfaces with the exception
of an installed HSIM in a 2H33-37R.
To access the Interface Statistics screen, use the arrow keys to highlight
the INTERFACE STATISTICS menu item on the Device Statistics
Menu screen and press ENTER. The Interface Statistics screen displays.
Figure 5-31 Interface Statistics Screen
NOTE
Cabletron Systems HSIMs gather their own statistics that may
be viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on
how to access these screens.
Firmware Revision: XX.XX.XX
Interface Statistics
22861_64
BOOTPROM Revision: XX.XX.XX
RETURN
Device Typee: 2H23-50R
2H23-50R LOCAL MANAGEMENT
Event Message Line
Interface: [
nn
]
InOctets:
InUnicast:
InNonUnicast:
InDiscards:
InErrors:
InUnknownProtos:
OutOctets:
OutUnicast:
OutNonUnicast:
OutDiscards:
OutErrors:
OutQLen:
Name: Ethernet Frontpanel
7500456
6789
0
0
0
0
0
0
0
0
0
0
CLEAR COUNTERS
EXIT
Interface: 1
Address:
Last Change:
Admin Status:
Oper Status:
MTU:
Speed:
Link Status:
Duplex Mode:
00-00-00-00-00-00
xx days 00:00:00
Up
Down
1514
100000000
No Link
Standard