2H23-50R/2H33-37R User’s Guide 4-1
CHAPTER 4
TROUBLESHOOTING
This chapter provides information concerning the following:
• Using LANVIEW diagnostic and status monitoring system
(Section 4.1)
• The FE-100TX LED (Section 4.2)
• Troubleshooting checklist for network and device operational
problems (Section 4.3)
• Using the RESET button (Section 4.4)
4.1 USING LANVIEW
The 2H23-50R and 2H33-37R use Cabletron Systems built-in visual
diagnostic and status monitoring system called LANVIEW. The
LANVIEW LEDs, shown in Figure 4-1 and Figure 4-2, allow quick
observation of the network status to aid in diagnosing network problems.
Refer to Table 4-1 for a description of the LEDs.
For a functional description of the LANVIEW LED on the optional Fast
Ethernet Interface Module (FE-100TX) that can be installed in a
2H23-50R, refer to Section 4.2.
For a functional description of the LANVIEW LED on an optional HSIM
installed in a 2H33-37R, refer to the user’s guide for that HSIM.
Figure 4-1 LANVIEW LEDs (2H23-50R)
12
12
Fast Ethernet
Interface Module
RX
TX
RX
TX
COM
PWR
CPU
RESET
CONN 1
CONN 3
2H23-50R
10
100
CONN 4
CONN 3
CONN 2
CONN 1
CONN 4
CONN 3
CONN 2
CONN 1
121121
121121
22862-36
TXRX
CPU
PWR
Link Speed
6