Filter
Top Products
Appendix C: Optional Installations and Mode Switch Bank Settings
C-6 2H23-50R/2H33-37R User’s Guide
• Switch 7 – Clear NVRAM. Changing the position of this switch resets
NVRAM on the next power-up. All user-entered parameters, such as
the IP address, device names, etc., are reset to the factory default
settings. Once the device resets, you can either use the factory default
settings or reenter your own parameters.
• Switch 8 – Reset Password/Community names. Changing the position
of this switch clears user-entered passwords stored in NVRAM, and
restores the factory default passwords on the next power-up. Once the
device resets, you can either use the factory default settings or reenter
your own passwords.
NOTE
Do not change the position of switch 8 unless it is necessary to
reset the module super-user configured passwords to their
factory default settings.