Filter
Top Products
Chapter 3: Installation
3-2 2H23-50R/2H33-37R User’s Guide
3.2 UNPACKING THE DEVICE
To unpack the device and verify the contents of the shipment, proceed as
follows:
1. Open the carton and remove the packing material.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the black and yellow tape seal on the non-conductive bag to
remove the device.
4. Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact the
Cabletron Systems Global Call Center as described in Section 1.6.
3.3 INSTALLING OPTIONS
If the 2H23-50R is to be installed with an optional Fast Ethernet Interface
Module, refer to Appendix C for installation instructions. If the
2H33-37R is to be installed with an optional HSIM, refer to the
installation instructions in the associated HSIM user’s guide.
Table 3-1 Contents of Carton
Item Quantity
2H23-50R or 2H33-37R 1
Antistatic Wrist Strap 1
Console Cable Kit 1
Rackmount Kit 1
Strain-Relief Bracket 1
Release Notes 1
Power Cord 2
Manual Accessory Kit 1
NOTE
Install any optional equipment before proceeding to
Section 3.4.