INTRODUCTION
1-6
numerous management devices and serve as their management data
representative. The network management station then has to query only
one management device, the MicroMMAC-T in DLM mode, to access
management data for all management devices on the network.
Consult your network manager for DLM setup.
COM Port Applications
Both of the front panel COM ports are factory-configured to support Local
Management connections. Select among configuration options for Local
Management, Uninterruptible Power Supplies (UPS), the Serial Line
Internet Protocol (SLIP), and modems.
LCD and LCD Display Button
MicroMMAC-T’s front panel LCD used in conjunction with the LCD
display button provides you with comprehensive system-level information
such as power-up diagnostics, FLASH image revision levels, IP addresses,
and error alerts. See Section 5.2 for more information.
Reset Button
The Reset button on the front panel initializes the processor when pressed.
The information contained in NVRAM is retained after initialization. See
Section 3.5 for more information.
MIB Support
The MicroMMAC-T provides access to the following Management
Information Bases:
Standard MIBs
• MIB-2 (RFC 1231)
• IEEE RMON MIB (RFC 1271)
• RMON Extensions for Token Ring (RFC 1513)
Cabletron Enterprise MIBs
• Download
• MIB-II Extensions