Filter
Top Products
LOCAL MANAGEMENT
4-32
• ENB (Enabled): The port is enabled and allows an attached station to
enter the ring.
• BYP (Bypassed): The port is disabled and the station is not on the
ring.
• LNK (Linked): The port is disabled and an attached station is trying
(sending phantom current) to access the ring
• INS (Inserted): The port is enabled and the attached station is
operational.
Ring In/Ring Out ports can be in either of the following two operational
states:
• ACT (Activated): The port or device is enabled and connected to the
ring trunk cable.
• WRP (Wrapped): The port or device is in the wrap state; there is no
access to the ring trunk cable.
BRIMs and the MicroSNAC device can be in either of two operational
states: ENB or BYP.
To display the status of ports 13-24:
1. Highlight the NEXT command and then press the Return key.
The screen displays the status of ports 13-24 for all modules.
2. Highlight the PREVIOUS command and then press the Return key
to return to the previous screen.
To display the status of RI/RO ports, BRIMs, or the MicroSNAC
device:
1. Highlight the NEXT command and then press the Return key.
Repeat Step 1. as many times as necessary to display the status of the
device you want.
The screen displays the selected device’s status.
2. Highlight the PREVIOUS command and then press the Return key
to return to the previous screen.