Filter
Top Products
INSTALLATION
3-5
3.3.3 Free-Standing Installation
For a free-standing shelf or table top installation, locate the
MicroMMAC-T, as shown in Figure 3-5, within 7 feet of its power source
on an unrestricted free surface area 21 inches wide, 18 inches deep, and 6
inches high.
Figure 3-5. Free-Standing Installation
3.4 CONNECTING TO A POWER SOURCE
NOTE: The MicroMMAC-T has a universal power supply that allows it to
use power sources from 85 Vac to 264 Vac, 47-63 Hz.
To connect the MicroMMAC-T to the power source, plug the power cord
into a grounded wall outlet. After the MicroMMAC-T runs a self test, the
CPU LED blinks green to indicate normal operation. If the LED remains
red, the processor is faulty.
3.5 RESETTING THE MICROMMAC-T
The MicroMMAC-T reset button is located on the left front panel as shown
in Figure 3-6.
21 IN.
6 IN.
18 IN.
TOKEN RING HUB
WITH
LANVIEW®
SUPPORTING 100 OHM STP CABLE
MicroMMAC-24T
Max. Dist. 7 FT.