Filter
Top Products
LOCAL MANAGEMENT
4-22
2. Highlight the SAVE/EXECUTE command and then press the Return
key.
Viewing the Revised Allowed List
1. Highlight the RETURN command and then press the Return key.
The SETUP MENU screen appears.
2. Highlight RING SECURITY and then press the Return key.
The RING SECURITY screen appears, showing the revised Station
Address allowed list.
Adding Stations to the STATION ADDRESS Allowed List
1. Highlight the Stn Edit field.
2. Using the following format, type the MAC address of the station you
want to add: XX-XX-XX-XX-XX-XX. Use the Backspace key to
delete unwanted characters.
3. Highlight the Add/Del field and then select Add.
4. Highlight the SAVE/EXECUTE command and then press the Return
key.
The new MAC address appears on the STATION ADDRESS allowed
list.
Deleting Stations from the STATION ADDRESS Allowed List
1. Set ring security to the Alarm/Remove mode.
2. Highlight the Stn Edit field.
3. Using the following format, type the MAC address of the station you
want to delete: XX-XX-XX-XX-XX-XX. Use the Backspace key to
delete unwanted characters.
4. Highlight the Add/Del field and select Del.
5. Highlight the SAVE/EXECUTE command and then press the Return
key.
The station’s MAC address no longer appears on the STATION
ADDRESS allowed list.
NOTE: You cannot delete the Micro-MMAC-T address from the list.