Cabletron Systems 42T Switch User Manual


 
LOCAL MANAGEMENT
4-10
1. Highlight the System Date field.
2. Type the date into the field in a MM/DD/YY format and then press the
Return key.
3. If the format is invalid, the message “INVALID DATE” appears.
Re-type the date using the correct format.
4. If the format is correct, highlight the SAVE command and press the
Return key.
The “SAVED” message appears on the screen indicating that your
change have been saved to memory.
Setting the System Time
Use this field to set the correct time.
1. Highlight the System Time field.
2. Type the time into the field in a HH:MM:SS format and then press the
Return key.
3. If the format is invalid, the message “INVALID TIME” appears.
Re-type the time using the correct format.
4. If the format is correct, highlight the SAVE command and then press
the Return key.
The “SAVED” message appears on the screen indicating that your
changes have been saved to memory.
Setting the Host IP Address
Use this field to set the Internet Protocol (IP) address for the
MicroMMAC-T.
NOTE: Only a user with Super-User access can change the device’s IP
address See Section 4.3.3 for information about Super-User access.
1. Highlight the IP Address field.
2. Type the IP Address into the field. The correct format for this entry is
XXX.XXX.XXX.XXX, with values of XXX ranging from 0-255.
If the format is invalid, the message “INVALID IP FORMAT”
appears. Retype the IP Address using the correct format.