Filter
Top Products
100 Chapter 3: EIU datafill
297-8991-910 Standard 03.01 August 1999
FLOOR 0 to 99
Floor number
Enter the number of the floor on which
the node is located.
ROW A to Z or
AA to ZZ
(excluding I, O, II,
and OO)
Row
Enter the row on the floor in which the
node is located.
POSITION 0 to 99
Bay position
Enter the position of the bay in the row
where the node is located.
ENTYPE alphanumeric
(vector of up to 12
characters)
External node type
Enter the type of the node, for example,
SUN or HP. This value must first be
datafilled in table ENTYPES.
ENINFO alphanumeric
(table of up to 20
characters)
External node information
Enter a string containing any additional
information about the node.
Character strings that contain blank
characters must be entered with three
single quotation marks at the start of the
string and three single quotation marks
at the end of the string.
ENPROCSR ALL
CORE
EIU
NONE
External node processor class
Enter the set of SuperNode processor
types with which the external node is
allowed to communicate.
Table control provides the user with the
capability of entering ALL or NONE. If
ALL is entered, values CORE and EIU
are automatically datafilled by table
control.
ENPROTCL ALL
ICMP
TCP
UDP
NONE
External node protocol
Enter the set of protocols with which the
external node can communicate with
the SuperNode.
Table control provides the user with the
capability of entering ALL or NONE. If
ALL is entered, values ICMP, UDP, and
TCP are automatically datafilled by
table control.
Table 26 Field descriptions for table EXNDINV for EIU datafill (continued)
Field Subfield or
refinement
Entry Explanation and action
(Sheet 3 of 5)