Filter
Top Products
80 Chapter 3: EIU datafill
297-8991-910 Standard 03.01 August 1999
Sample datafill for table IPROUTER
Figure 17 shows sample datafill for table IPROUTER for an EIU.
Figure 17 Datafill example for table IPROUTER
Table IPHOST
Table IPHOST assigns the IP addresses to SuperNode end hosts. SuperNode
end hosts can have one or two addresses, depending on the entry in field
NODENAME.
Table IPHOST activates the TCP layer and its applications on those nodes.
Note: If the TCPCONN field in table IPHOST is set to 0, communication
in related applications stops.
Table IPHOST also supports application processor (AP) and file processor
(FP) datafill for both Support Operating System (SOS) nodes and for SOS
SuperNode UNIX (SNIX) nodes for which two IP addresses are needed.
ETHARP YES or NO
Ethernet address resolution protocol
Enter YES if the EIU is to engage in
address resolution protocol (ARP)
activity within the Ethernet subnet.
Otherwise, enter NO.
The default value for this field is YES.
ETHPARP YES or NO
Ethernet proxy address resolution
protocol
Enter YES if EIU is to engage in proxy
ARP activity on behalf of the
SuperNode hosts within the Ethernet.
Otherwise, enter NO.
The default value for this field is YES.
Table 13 Field descriptions for table IPROUTER for EIU datafill (continued)
Field Subfield or
refinement
Entry Explanation and action
(Sheet 2 of 2)
RKEY ROUTER SNIPADR ETHIPADR ETHARP ETHPARP
-----------------------------------------------------------------------
0 EIU 117 47 209 192 117 47 59 132 241 YES YES