126 Appendix C: Using FTP
297-8991-910 Standard 03.01 August 1999
2 You have completed this procedure.
Tutorial: moving files
This section provides a set of procedures to move files between a remote host
and the DMS-100 switch which is the local host. It describes the command
lines for the following FTP operations:
• setting file type to ASCII
• moving an ASCII file from the remote host to local host
• moving an ASCII file from the local host to remote host
• setting file type to binary
• moving a binary file from remote host to local host
Procedure 5 Copying ASCII files to and from the remote host
Step Action
1 Establish an FTP session and determine your location as described in
procedure 1 in this appendix.
2 Determine the next step.
3 Change directory on the remote host by typing
ftp> cd path_name
and pressing the Enter key.
where
path_name is a valid directory path
Example:
ftp> cd ‘/team/bin’
Example of a MAP response:
250 CWD command successful.
4 Set the file type to ASCII by typing
ftp> ascii
and pressing the Enter key.
Example of a MAP response:
200 Type set to A.
If the file Do
is not on the current
remote directory
step 3
is on the current
remote directory
step 4