Filter
Top Products
Chapter 3: EIU datafill 75
DMS-100 Family EIU User Guide TELECOM12
While table 12 provides all the information you need to datafill for EIUs,
complete information on table IPNETWRK is in DMS-100 Translations
Guide, 297-xxxx-350.
Table 12 Field descriptions for table IPNETWRK for EIU datafill
Field Subfield or
refinement
Entry Explanation and action
KEYREF refer to subfield
Key reference.
This field consists of
subfield TAB_KEY.
TAB_KEY 0 to 15
Table key.
Enter data in the network
interfaces. You can enter a maximum
of 16 entries.
CMIPADDR IP address with
four numbers
from 0 to 255
Computing module Internet Protocol.
address.
Enter the Internet Protocol
(IP) address of the CM. Separate each
number in the address with a single
space. For example, 47 2 86 122 is
equivalent to an IP address of
47.2.86.122.
SUBNET 1 to 23
Internet Protocol network subnet range.
Enter the range of the IP network
subnet mask bit width. Entries outside
the range indicated for this field are
invalid.
OPTION refer to subfields
Option.
This field consists of subfields
WORD_EIU and EIU_RNG. You can
enter up to a maximum of two options. If
you enter less than two options, end the
entry with a $.
This field defines the default EIU used
for routing.
WORD_EIU EIU or
EXTERNAL_
ROUTER
Ethernet interface unit
. Enter EIU
(Ethernet interface unit) or
EXTERNAL_ROUTER.
EIU_RNG 0 to 750
Ethernet interface unit range.
Enter the
number that is assigned to the EIU.
PARMAREA refer to subfields
Parameter area.
This optional field
consists of subfield PARM. You can
enter a maximum of 12 multiples of this
field. If you enter less than 12 multiples,
end the list of entries with a $.
(Sheet 1 of 3)