Filter
Top Products
SEHI User’s Guide 4-1
CHAPTER 4
INSTALLATION
This chapter outlines the procedure for attaching the SEHI to the network
as a stackable or standalone device. Ensure that the network meets the
guidelines and requirements outlined in Chapter 3, Installation
Requirements and Specifications, before installing the SEHI.
4.1 UNPACKING THE SEHI
Unpack the SEHI as follows:
1. Remove the shipping material covering the SEHI in the shipping box.
2. Carefully remove the SEHI from the shipping box and set it aside to
prevent damage.
3. Visually inspect the SEHI. If there are any signs of damage, contact
Cabletron Systems Technical Support immediately.
4. Read the SEHI Release Notes included in the shipping box.
Failure to follow installation instructions may result in an
electrical shock hazard.
NOTE
Cabletron Systems includes a 3-1/2" disk with the SEHI that
contains a backup copy of the SEHI Flash Firmware Image
File. Download the file to the SEHI if the existing image
becomes corrupted.
SEHI Book Page 1 Friday, April 19, 1996 10:46 AM