Filter
Top Products
Chapter 7: Local Management
7-24 SEHI User’s Guide
Using the DISABLE PORT Command
The DISABLE PORT command lets the user disable the port selected in
the PORT command. The user must first use the Port command to select
the desired port.
To set the DISABLE PORT command:
1. Use the arrow keys to highlight the DISABLE PORT command at the
bottom of the screen.
2. Press ENTER. The corresponding port is enabled and the Port Admin
Status field is updated.
Exiting the Device Statistics Screen
Use the following steps to exit the Device Statistics screen and return to
the Feature Selection screen:
1. Use the arrow keys to highlight the RETURN command at the bottom
of the screen.
2. Press ENTER. The Feature Selection screen appears.
SEHI Book Page 24 Friday, April 19, 1996 10:46 AM