Filter
Top Products
Chapter 7: Local Management
7-6 SEHI User’s Guide
7.3 ACCESSING LOCAL MANAGEMENT
After configuring the local management terminal and properly attaching
the cables to the SEHI, access the Local Management interface.
1. Power up the terminal. The password screen (Figure 7-2) appears.
Figure 7-2 Password Screen
2. Enter the Password. The factory default password for Super-User
access is “public” or press ENTER.
3. Press ENTER.
• If the password entry is invalid, the cursor returns to the beginning
of the password entry field.
• If the password is valid, the associated access privilege appears
briefly, then the SEHI Local Management Feature Selection
screen shown in Figure 7-3 appears.
NOTE
The password is one of the community names specified in the
Community Name Table. Access to certain Local Management
capabilities depends on the degree of access accorded that
community name. Refer to Section 7.5 for more details about
community names.
Cabletron Systems Incorporated
35 Industrial Way, P.O. Box 5005
Rochester, NH 03867-0505 U.S.A.
(603) 332-9400
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
(c) Copyright Cabletron Systems, Inc. 1993
EnterUser Password:
SEHI F/W Version: X.XX.XX
Boot Prom Version: X.XX.XX
SEHI Board Version: X.X
1490_21
SEHI Book Page 6 Friday, April 19, 1996 10:46 AM