Filter
Top Products
Fax (D1180/D1170/D1150)
6-29
Adjusting Density
Adjusting Density
You can adjust the density to the most appropriate level for the document you send.
1
Place documents.
2
Press [SEND/FAX]/ [FAX].
3
Press
[SEND/FAX] repeatedly to
select <FAX>, then press [OK].
S E L E C T : O K
F A X
For the D1150, skip this step.
4
Specify the destination.
T E L = 0 1 2 X X X X X X X
F A X N U M B E R
Ex.
For details, see “Specifying Destinations,” on p. 6-
19.
5
Press [Density].
6
Press or to adjust the density,
then press [OK].
- L T D K +
D E N S I T Y
: to make light documents darker
: to make documents lighter
This setting returns to the default after all
documents are scanned. If you want to keep
the setting, see “Standard Send Settings,” on
p. 6-35.
You can preset the standard density level on a
nine-step scale. (See “Changing Density Level,”
on p. 6-34.)
–
–
7
Press [Start].
When you place the documents on the platen
glass, press
or to select the document
size, then press
[Start] for each document.
When scanning is complete, press [OK] to start
sending.
–
–