Filter
Top Products
11-9
Maintenance
Replacing the Toner Cartridge
6
Align the toner cartridge to the guides in
the machine and slide the cartridge
completely into the machine until it
stops.
7
Close the front cover.
Be careful not to get your fingers caught.
If you cannot close the front cover, do not force
it to close. Open the cover and make sure the
toner cartridge is properly set in the machine.
–
–
Replacing the Toner Cartridge with
a New One
When the message <OUT OF TONER/CHANGE TONER>
appears, replace the toner cartridge with a new one.
When toner empty error occurs while receiving fax,
printing fax is interrupted and the received data will
be stored in the memory. If you set <KEEP
PRINTING>, you can keep printing fax documents or
reports without replacing the toner cartridge. (See
“TX/RX SETTINGS ,
” on p. 13-6.)
When <KEEP PRINTING> is set, the printed documents may be
light or blurred because of lack of toner. The data is erased
when the documents are printed out, so you can not print the
same documents again. (See “TX/RX SETTINGS ,” on p. 13-6.)
1
If you are using the multi-purpose tray,
fold multi-purpose tray extension, push
back the auxiliary tray into place, and
then close the multi-purpose tray.
2
Push the open button.
3
Open the front cover.
–