Filter
Top Products
Fax (D1180/D1170/D1150)
6-40
Adjusting the Pause Time
Adjusting the Pause Time
Some overseas dialing may be affected by the distance or complex routing of connections
when dialing the international access code, country code, and the destination’s telephone
number all at once. In such cases, insert a pause after the international access code. When
the machine dials the number, it will pause where the pause was inserted in the number.
This helps to improve the connection. The default setting is two seconds.
You can insert a pause when you dial the fax number using – [numeric keys]. (See “Dialing an Overseas Number
(With Pauses),” on p. 6-15.)
Pauses entered at the end of dialed fax numbers are always 10 seconds long.
–
–
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <TX SETTINGS>,
then press [OK].
3 . T X S E T T I N G S
F A X S E T T I N G S
5
Press or to select <PAUSE TIME>,
then press [OK].
2 . P A U S E T I M E
T X S E T T I N G S
6
Use , , or
– [numeric keys] to
set the pause time, then press [OK].
2 S E C
P A U S E T I M E
The pause time can be set from 1 to 15 seconds
in one second increments.
7
Press [Stop/Reset] to return to the
standby mode.