Filter
Top Products
3-10 Paper Handling Chapter 3
❍ Use the printer driver to set any necessary print
properties; for example, you need to change the settings
in the printer driver if you are printing photos or using
special paper.
Auto Feed Guidelines
When automatically feeding stacks of paper, follow these guidelines:
❍ Do not open the front cover while printing. This may cause paper
jams, smudges, or malfunctions.
❍ Do not leave paper stacked in the printer for long periods of time;
longer sheets of paper may become bent or curled over time. This
may cause the paper to misfeed or jam.
❍ Depending on the density of your printed pages, the ink may need
time to dry. Within two to three seconds, the ink becomes smudge
resistant.
❍ If your printed page contains lots of graphics, the ink may take
longer to dry.
❍ The capacity of the paper output tray is 20 sheets of paper. To
reduce paper jams, remove paper from the output tray before the
count reaches 20.
❍ If paper curls after printing, remove it immediately; otherwise, paper
jams may occur.
❍ Make sure there are no gaps between the stack of paper and the
paper guide nor the right edge of the sheet feeder.
Start your
print operation.