Filter
Top Products
5-8 Troubleshooting Chapter 5
Printing does not start due to an application error or General Protection Fault.
Cause Solution
Printing from a Change applications
Windows 3.1 application A Windows 3.1 application installed on a Windows 98 or
Windows 95 system may cause this problem. Print from
a Windows 98 or Windows 95 software application.
Multiple software Quit other programs
applications running Quit any other application programs you are running and
try printing again.
Sufficient memory Check your memory
not available for the Refer to the manual for your software application and
software application check that the required amount of memory is allocated
to the application.
If there is not enough memory installed, install more
memory. Refer to the documentation for your computer
for information on installing additional memory.
Sufficient space not Delete files
available on hard disk Delete any unnecessary files to make more space
available
Internal file or Rebuild the document and print it again
application software If there is no problem with the new document, the
problem original file was probably faulty. If the same problem
occurs with the new file, call the Canon Customer Care
Center for help.