Filter
Top Products
231Troubleshooting - Scanning result is unsatisfactory
Scanned image blurred or distorted
Check 1
Are you using a clear image for scanning?
Blurry images are not suited for scanning. For best scanning results,
always use a clear, sharp images. A scanned image cannot be better than
the original image.
Check 2
Is the scanning holder unstained and undamaged?
As you use the scanning holder with originals, it is bound to get dirty. Clean
the scanning holder using a soft cloth dipped in a weak, neutral detergent
solution, and then wipe its wet surface off with a dry, soft cloth. If the scan-
ning holder is scratched or damaged, replace it.
Additional scanning holders in A5 and A4 sizes can be purchased option-
ally. Note that the availability differs from area to area.
Check 3
Are you scanning thick paper?
For scanning, an image you use must be thinner than 0.25mm. Note that
the thickness including the scanning holder must be thinner than 0.45mm.
Note