Canon C4580I Printer User Manual


 
Setting Up a Computer for Printing/Sending a Fax
4-12
4
Using a NetWare Network (Windows)
Setting Up a Computer for Printing/Sending a Fax
After you have completed specifying the NetWare print service settings and printer
protocol settings, you are ready to set up each of the computers for printing or
sending a fax.
IMPORTANT
Optional equipment is required to print or send a fax from a computer. For the equipment
needed, see "Optional Equipment and System Requirements," on p. 1-2.
Connecting to a NetWare Network
In order to use a NetWare network, all computers that will perform printing or
sending a fax need to have NetWare client software installed. For details, see your
NetWare and operating system manuals.
Printer Connection Method
Install the driver according to the following procedures indicated in the manual for
each driver. (The UFR II printer driver is not available for Windows 98/Me.)
If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
PCL Driver Guide.
If you want to use the PS printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
PS Driver Guide.
If you want to use the UFR II printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
UFR II Driver Guide.
If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
Fax Driver Guide.
When the dialog box for selecting the port appears during installation, click [Use
Network Printer] [Settings]. From the list, select the print queue that you created
in "NetWare Print Service Settings," on p. 4-3.