Canon C4580I Printer User Manual


 
Communication Environment Setup
2-12
2
Settings Common to the Network Protocols
IMPORTANT
The machine supports the SNMP v. 1 and SNMP v. 3 management functions. You
can use them simultaneously. The [Read Only]/[Read/Write] functions of SNMP v.
1 and the security functions of SNMP v. 3, such as an encrypted communication
path, enable you to manage devices more securely.
The available combinations of SNMP v. 1 and SNMP v. 3 functions you can use are
shown below:
If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP
v. 1> and [Enable Dedicated Port] (for IPv4 only).
You can restrict the IP addresses of computers on which items can be set or
browsed. If you restrict the IP addresses, it is not possible to set or browse detailed
information concerning the machine on computers other than those whose IP
addresses are allowed, even if <Use SNMP v. 1>, <Use SNMP v. 3>, and [Enable
Dedicated Port] (for IPv4 only) are 'On'. For details, see "TCP/IP Settings (IPv4),"
on p. 3-3 or "TCP/IP Settings (IPv6)," on p. 3-19.
SNMP v. 1 SNMP v. 3
Description
Use
SNMP v. 1
MIB Access
Permission
Use
SNMP v. 3
On Read/Write On/Off
You can set or browse each item of the
machine with a utility that uses SNMP
v. 1 to obtain information.
As the write access with SNMP v. 1 is
enabled, the security functions of
SNMP v. 3 are not available,
regardless of the settings for <Use
SNMP v. 3>.
On Read Only On
You can only browse each item of the
machine with a utility that uses SNMP
v. 1 to obtain information.
Only users who have been assigned
access rights can set each item of the
machine with a utility that uses SNMP
v. 3.
On Read Only Off
You can only browse each item of the
machine with a utility that uses SNMP
v. 1 to obtain information.
Off - On
Only users who have been assigned
access rights can set or browse each
item of the machine with a utility that
uses SNMP v. 3.
Off - Off
You cannot set or browse each item of
the machine with a utility.