Canon C4580I Printer User Manual


 
Protocol Settings
3-24
3
Using a TCP/IP Network
IMPORTANT
A total of eight (groups) of IPv6 addresses, ranges of IPv6 addresses, or IPv6
address prefixes can be set.
You cannot specify a multicast address or an address composed entirely of zeros
for an IPv6 address.
If you enter '0' in [Prefix Length], all IPv6 addresses are not permitted.
If you enter '128' in [Prefix Length], the IPv6 addresses of the machine are not
permitted.
If you want to enter a range of addresses, make sure that the number entered in
[First Address] is less than the number entered in [Last Address].
If <Apply Settings> is set to 'Off' for both [Permit IPv6 Address] and [Reject IPv6
Address], all IPv6 addresses are permitted.
If <Apply Settings> is set to 'Off' for [Permit IPv6 Address] and <Apply Settings> is
set to 'On' for [Reject IPv6 Address], IPv6 addresses that are beyond the range
specified in [Reject IPv6 Address] are permitted.
If <Apply Settings> is set to 'On' for [Permit IPv6 Address] and <Apply Settings> is
set to 'Off' for [Reject IPv6 Address], IPv6 addresses that are beyond the range
specified in [Permit IPv6 Address] are not permitted.
If <Apply Settings> for both [Permit IPv6 Address] and [Reject IPv6 Address] is set
to 'On', IPv6 addresses that are beyond the ranges specified in both [Permit IPv6
Address] and [Reject IPv6 Address] are not permitted.
If <Apply Settings> for both [Permit IPv6 Address] and [Reject IPv6 Address] is set
to 'On', IPv6 addresses that are within the ranges specified in both [Permit IPv6
Address] and [Reject IPv6 Address] are not permitted.
If the usage of a protocol or print application is not permitted on your device, it
cannot be used even if its IPv6 address is permitted on the machine. Configure the
settings of the device to permit the protocol or print application.
NOTE
This machine logs attempts to gain access from IPv6 addresses that it has been
set to reject. For instructions on how to refer to the access log, see "Viewing the
Network Access Log," on p. 8-24.
7
On the TCP/IP Settings screen, press [DNS Settings] [DNS
Server Address Settings].