Filter
Top Products
Caution Inside the printer, the area around the print head can become extremely hot. Do not touch
the print head or nearby components.
Printer Moves But Does Not Print
Ensure that the ink tanks are installed correctly.
Ensure that the packing material has been removed completely.
Print the nozzle check pattern to ensure that the ink is ejected properly.
If the nozzle check pattern does not print correctly, clean the print head.
See Printing the Nozzle Check Pattern
If the problem is not resolved by cleaning the print head several times, replace either of ink tanks. If the print
quality still remains poor, the print head may be worn out. Contact a Canon service facility.
Print Head Holder Does Not Move to the Center
Ensure that the printer is turned on.
The print head holder will not move unless the power is on. If the POWER lamp is off, close the front cover
and turn the power on.
If the POWER lamp is flashing green, the printer is initializing.
When the POWER lamp stops flashing, open the front cover again.
If the front cover has been left open for a while, close and reopen it.
If the front cover is left open for more than 10 minutes, the print head holder moves to the right to prevent the
print head from drying out. Close and reopen the front cover to return the holder to the center.