Filter
Top Products
Photo Paper Pro PR-101
This is a thick paper with a treated surface that enhances gloss and provides superior color reproduction. It is ideal
for printing high quality photographs. This paper can be used when printing with a digital camera connected. This
media is available in A4, Letter and 4" x 6" / 101.6 x 152.4 mm sizes.
Loading
Load the paper with the glossier side facing up.
Up to 20 sheets of 4" x 6" / 101.6 x 152.4 mm paper can be loaded at once. You may load up to 10 A4 or
Letter size sheets, but put them in place one at a time to keep them from sticking to each other.
If paper is curled, flatten it before loading.
Printer Driver Settings
Media Type: Photo Paper Pro
Page Size: Ensure that the setting matches the size set in the application.
Handling of Printed Output
Do not stack more than 10 sheets of A4 or Letter size paper or 20 sheets of 4" x 6" / 101.6 x 152.4 mm
paper in the paper output tray (for i350 only).
Do not touch the printed surface until the ink is fixed (approx. 30 minutes).
Colors in dark images may appear indistinct at first, but become clearer after about 30 minutes.
Images may smudge if you place them in an album before the ink is completely dry. It is recommended
that you allow the ink to dry for 24 hours.
Do not attempt to dry the ink with a hair dryer or by exposing printed sheets to direct sunlight.
Storing Printed Output
Do not store or display printouts in hot, damp or humid conditions.
Never expose them to heat or direct sunlight.
Store printouts in photo albums, photo frames or presentation binders to protect them from direct
exposure to air or sunlight.
Do not mount printouts in an adhesive-type album, as you may not be able to remove them.
Be aware that some types of plastic folders or albums may cause the edges of the paper to turn yellow.
Printable Area
See Printing Area
Note (For i350 only)
When you use Borderless Printing, create the data by using the same size as the paper size,
and paste the data so that it fills the editing screen without leaving any margins. If you are
using an application that allows you to set margins, set the left, right, top and bottom
margins to 0 mm or 0 inches. For instructions on setting margins, refer to the user's manual
for your application.