Filter
Top Products
51
[Feeder/Flatbed]
Specify whether to scan documents using the feeder or the flatbed
when the business card feeder is closed.
If [Auto] is selected, scanning occurs from the feeder only when
documents are placed in the feeder. (If there are no documents in the
feeder, the documents placed on the flatbed are scanned.)
Hint
• To scan using the flatbed, set [Feeder/Flatbed] to [Flatbed] or
[Auto].
• If [Feeder/Flatbed] is set to [Auto], documents placed in the feeder
are scanned. If there are no documents in the feeder, the
documents placed on the flatbed are scanned.
• When the business card feeder is open, this setting is fixed at
[Business card feeder].
• This setting is automatically set to [Feeder] when [Rapid recovery
system] is enabled in the [Others] tab.
Scanning Custom Page Sizes
You can name and register a non-standard page size as a custom
page size from the Page Size drop-down list in the [Scan Area] dialog
box, which is opened by clicking [Area] in the [Basic] tab.
Specifying the Scanning Area
Configure the following settings when you want to specify the
scanning area.
Area Specification
Specify the area of the document to scan in the [Scan Area] dialog
box, which is opened by clicking [Area] in the [Basic] tab.
Hint
In CapturePerfect 3.0, the last image that was scanned appears in
the preview window. Use [Scan Page] to scan the document for
which you want to set the area, and the new image will appear in the
preview window.