Filter
Top Products
Additional Copy Functions
2
2-31
Erasing Shadows and Frame Lines from Copies (Frame Erase)
Making Copies by Erasing the Frame Around the Original
(Original Frame Erase)
1 Place your originals, and press [Special Features]
➔
[Frame Erase] in this order.
2 Press [Original Frame Erase], and set the frame width area to erase by pressing
[–] or [+], and press [Next].
When entering values in millimetres, you can use - (numeric keys) and .
If you enter the value with - (numeric keys), you can change the entered value by pressing
[–] or [+].
The frame area is erased evenly (based on the value you set) around each edge of the original.
To set different frame erase width values for the top, left, right, and bottom sides of the original
independently, press [Adjust Each Dim.].